Nikos Pantelelis, Efthymios Bistekos, Marc Waris, Adrien Touze, Intelligent process monitoring of RTM production in Aerospace, SAMPE Europe Conference 2023, Madrid, Spain.
Pantelelis, B. Haspel, A. Barros, S. Thiel and S. Jürges, Cost reduction through online intelligent process control, Proceedings of Windblade Manufacture Conference, Dusseldorf, Germany, December 13-15, 2022.
Nikos Pantelelis, Efthymios Bistekos, Wilco Gerrits, Stefan Wilkens, Daniel Breen, Sam Wilson, Online Tg without mould/ autoclave modifications, 9th International Symposium on Composites Manufacturing for High Performance Applications (ISCM 2021), 3-4 November 2021.
Nikos Pantelelis, Efthymios Bistekos, Wilco Gerrits, Stefan Wilkens, Daniel Breen, Sam Wilson, Non-intrusive online Tg estimation for advanced composites manufacturing, International Conference on Manufacturing of Advanced Composites, 20–22 October 2021, UK.
Nikos Pantelelis, Efthymios Bistekos, Wilco Gerrits, Stefan Wilkens, Daniel Breen, Sam Wilson, Non-intrusive Online Tg for the efficient manufacturing of CFRP, 13th International Symposium on NDT in Aerospace 2021, October 5-7, 2021, Williamsburg, Virginia, USA.
Nikos Pantelelis, Efthymios Bistekos, Wilco Gerrits, Stefan Wilkens, Daniel Breen, Sam Wilson, Non-intrusive intelligent cure monitoring for enhancing the manufacturing of high-temp composite structures, SAMPE Europe Conference 2021, Baden/Zürich – Switzerland.
Barkanov E., Akishin P., Namsone E., Bondarchuk A. and Pantelelis N. (2020): Real Time Characterization of Pultrusion Processes with a Temperature Control. Mechanics of Composite Materials, Vol. 56, No. 2, 135-148.
Pantelelis, E. Bistekos, R. Emmerich, P. Gerard, A. Zoller, R.Ruiz Gallardo, Compression RTM of reactive thermoplastic composites using microwaves and cure monitoring, Procedia CIRP, Volume 85, 2019, Pages 249-254
N.Pantelelis, W. Gerrits, R. Klomp-de Boer, A. Johnston, S. Wilson, A. McKibbin, C. Brauner, F. Schadt, L. Amirova, M. Grob, Cure monitoring of high-temperature resins for enhancing the manufacturing of advanced composites, EASN Conference, Athens, September 2019.
Philipp Zapp, Nikos Pantelelis, Hakan Ucan, The way to decrease the curing time by 50% in the manufacturing of structural components using the example of FML fuselage panels, SAMPE Europe Conference, Nantes, September 2019
Nikos Pantelelis, Matt Etchells, Cristian Lira, Efthymios Bistekos, Online Viscosity and Tg Measurement of CFRP manufactured using High-Pressure RTM, SAMPE Europe Conference, Nantes, September 2019.
Nikos Pantelelis, Wilco Gerrits, Ronald Klomp-de Boer, Alan Johnston, Sam Wilson, Andrew McKibbin, Cure monitoring of a BMI resin for enhancing the manufacturing of high-temp composite structures, SAMPE Europe Conference, Nantes, September 2019.
H.Ucan, S.Absagen, D.Nieberl, J.Scheller, T.Beumler, N.Pantelelis, Automated, Quality Assured and High Volume Oriented Production of Fibre Metal Laminates (FML) for the Next Generation of Passenger Aircraft Fuselage Shells, 4th International Symposium on Automated Composites Manufacturing, Montreal, Canada, April 25-26, 2019
P.Zapp, H.Ukan, A.Kühn, E.Bistekos and N.Pantelelis, INTELLIGENT PROCESS MONITORING IN THE MANUFACTURING OF FML STRUCTURES, International Symposium on Composites Manufacturing for high performance applications, 2018, NLR, Marknesse, NL.
G. Stamatopoulos, D. Modi, C. Lira, N. Pantelelis, M. Stojkovic, DEVELOPMENT OF A PROCEDURE FOR ACCURATE SIMULATION OF THE RESIN TRANSFER MOULDING PROCESS, ECCM18 - 18th European Conference on Composite Material, Athens, Greece, 24-28 June 2018.
M. Etchells, N.Pantelelis and C. Lira, CURE MONITORING OF HIGHLY REACTIVE RESIN DURING HIGH-PRESSURE COMPRESSION RESIN TRANSFER MOULDING, ECCM18 - 18th European Conference on Composite Material, Athens, Greece, 24-28 June 2018.
C. Lauter, K. Jaquemotte, N. Pantelelis, Advanced process control for higher productivity and online quality control, Proceedings of Windblade Manufacture Conference, Dusseldorf, Germany, December 2017.
IMPROVEMENT OF PRODUCTIVITY AND QUALITY IN THE WIND ENERGY INDUSTRY THROUGH THE USE OF AN ADVANCED SENSOR SYSTEM, Christian Lauter, Klaus-Peter Jaquemotte and Nikos Pantelelis, SAMPE Europe Conference 2017, Stuttgart, Germany.
AUTOMATING RESIN TRANSFER MOULDING, Cristian Lira, Miles Holt, David Fishpool, Ioannis Papasideris and Nikos Pantelelis, SAMPE Europe Conference 2017, Stuttgart, Germany.
ONLINE INTELLIGENT CURE MONITORING FOR AEROSPACE APPLICATIONS, Philipp Zapp, Alexandra Kühn and Nikos Pantelelis, SAMPE Europe Conference 2017, Stuttgart, Germany.
A.Tontisakis, N.Pantelelis and E.Bistekos, R.Hein, T.Wille, K.Gabtni, J-P.Dias, Towards the intelligent RTM system, CAMX Conference, Anaheim, 2016
Nikos Pantelelis and Efthymios Bistekos, Intelligent process monitoring and control to take composites processing to the Industry 4.0 era, 7th International Symposium on Composites Manufacturing for High-Performance Applications (ISCM), Braunschweig, 24th-25th August 2016.
Nikos Pantelelis et al, Intelligent process monitoring and control: Two industrial applications, International Conference in Advanced Composites Manufacturing, Bristol, UK, June 2015.
Nikos Pantelelis, Intelligent Process Control for Advanced Composites Manufacturing, CFK-Valley Convention, Stade, Germany, June 2015.
Nikos Pantelelis, Combining process simulation and sensing for optimised composites manufacturing, in: 12th International Conference on Flow Processing in Composite Materials (FPCM 12), July 14-16 2014, Enschede, The Netherlands
Nikos Pantelelis et al, Tool Vibrations for the advancement of the Vacuum Infusion process in 12th International Conference on Flow Processing in Composite Materials (FPCM 12), July 14-16 2014, Enschede, The Netherlands
Intelligent monitoring of the infusion of large carbon-fibre reinforced structural parts, Nikos Pantelelis, Anurag Bansal, Isabel Harismendy, Ricardo Mezzacasa and Efthymios Bistekos, First International Symposium on Automated Composites Manufacturing, April 11-12, 2013, Concordia University, Montreal, Canada
Reliable cure monitoring and control in the advanced composites manufacturing, N. Pantelelis, 6th International Symposium on Manufacturing Technology for Composite Aircraft Structures, Stade, October 2012.
In-situ process monitoring and quality control for advanced liquid composite moulding, Nikos Pantelelis and Trevor Millar, ICMAC’11, Belfast, UK.
Applied process monitoring and control for liquid composites moulding, Nikos Pantelelis, Gilles Nedelec, 7th International Symposium on RTM and Infusion, 9-10 February 2011, Saint-Avold, France
Applied process monitoring and control for manufacturing of advanced composites, N. G. Pantelelis, E. Bistekos, 5th International Symposium on Manufacturing Technology for Composite Aircraft Structures, ISCM 2010, NLR, October 2010.
